How to Upgrade Firmware of Reolink Camera via Reolink Client


  • After you downloaded the firmware from Reolink website, please use decompression software such as WinZIP or WinRAR to extract the firmware file to a folder;
  • DO NOT turn off the power during upgrade process;
  • If your camera is connected to a NVR instead of your router, please upgrade it on the NVR.

Step 1. Please download the latest firmware for your camera.

Step 2. Launch Reolink Client and login your camera;

Step 3. Open “Device Settings” menu and enter “Maintenance”;

Step 4. Click “Firmware Upgrade from Local” in “Maintenance” menu;

Step 5. Browse for the firmware you downloaded and extracted, then click “Upgrade” to proceed;

Browse Firmware File

Please NOTE, if “Upgrade Configure File” has been checked, all the settings of the camera will be lost, you will need to reconfigure it later.

Step 6. Please close Reolink Client and wait for the camera to reboot after upgrade finished;

Step 7. Check camera firmware version in “Device Setting >> System >> Information” to see if upgrade succeeds or not.

If you experience any problems, please contact us for further support.

Applies to:

All Reolink cameras

in Client Software