How to Access Reolink Products Remotely via DDNS

 

Step 1. Sign up and get a domain name from No-IP. Please click this link: http://www.noip.com/.
Click “Sign Up for Free” down to the bottom and follow the steps to finish.

Sign Up

After you successfully sign up, please login to your account, go to “Dynamic DNS” >> “Hostnames” to check your domain.

Check Domain Name

Step 2. Configure “DDNS” on your Reolink device.
Launch the Reolink client software and go to “Device Settings” >> “Network Advanced” >> “DDNS”, enable DDNS and choose “no-ip” as the “DDNS Server type”, input the Domain name, Username and Password from no-ip and click “OK” to save the settings.

DDNS Setup

Step 3. Check the value of the “Media port” for your Reolink product.
Please go to “Device Settings” >> “Network Advanced” >> “Port Settings” to check it.

Media Port

Step 4. Forward the “Media port” to the IP address of Reolink product on the router.
Please note: Different routers have different page to set up. You may refer to the router user manual for details.

Step 5. Open the Reolink App, click the PLUS icon to add new device, click Enter, tap UID to change into IP/Domain, fill in the No-ip domain into it and click Done.

 

After that, go back to Devices page, and tap the camera to log in. You may be prompted to input the correct password. After that, you should be able to link to the camera remotely using domain!

 

 

 

 

If you experience any problems, please contact us for further support.

 
Applies to:
All Reolink cameras and POE NVRs, except the battery powered camera

in Mobile App
Best Sellers in Reolink Help Me Choose
argus-2

Relink Argus® 2

100% Wire-Free 1080p Rechargeable Battery Powered Weatherproof Security Camera!

Learn More
c1-pro

C1 Pro

1440p Smart Pan & Tilt Wireless Camera; See What's Happening in Your House.

Learn More
rlc-410

RLC-423

5MP/4MP High Speed PTZ PoE Security Camera; No Blind Spots; 190ft Night Vision.

Learn More