Power over Ethernet

Reolink RLA-PS1 provides a reliable PoE solution featuring 8 PoE+ ports (10/100/1000Mbps) and 2 Gigabit Ethernet uplink ports (10/100/1000Mbps). Compliant with IEEE802.3af/at standard, it can deliver up to 30W for each PoE port and has a total power budget of 120W for at most 8 PoE devices.

IEEE802.3af/at

Standard

30W

Max. Output Power Per Port

120W

Max. Total Output Power

Extend Mode

Cast away your annoyance of cabling for a large space. The Extend Mode enables Port 1 & Port 2 to transfer data at a rate not higher than 10 Mbps, while extending the PoE transmission distance to 250m (820ft).

Note: Standard Cat5e cables required.

Recovery Mode

Automatically detects and reboots offline or unresponsive PoE devices to reduce manual intervention and ensure a stable PoE connection.

Multiple Protection Mechanisms

Intelligent Power Management

This PoE switch features a power management mechanism, so when the total allocated power exceeds the power budget (120W), the PoE ports will be powered off one by one, starting from Port 8, until the total power goes below the threshold that the PoE switch is capable of supplying.

Auto Detection of Adaptive Devices

Reolink RLA-PS1 will automatically detect whether the device connected to its ports is a PoE device and whether it needs to be powered. To avoid damage, it will not supply power to non-PoE devices.

4KV Surge Protection

Applying professional lightning protection, this PoE switch will effectively prevent the power of lightning strikes from damaging connected devices and ensure their long-term service.

Low-Noise Performance

The RLA-PS1 operates with a fanless cooling design, eliminating noise to create a quiet environment at all times.

Plug & Play

Reolink RLA-PS1 works perfectly with your PoE cameras and transfers both data and electric power, with only one Ethernet cable required. Easy to set up, even for beginners. Designed to meet your diverse needs, it can be directly connected to your NVR for higher reliability and security, or it can be connected to the same LAN as your product to support more features of your cameras.

Note: This PoE switch can only provide network access, but not power, when connected to a Wi-Fi camera.

Work in the Same LAN as the Product

Connect Directly to NVR