[Official] Reolink RLN4E | 4-Channel PoE NVR with Intelligent H.265+ Codec\t\t\t

RLN4E

4-Channel PoE NVR with Heatmap & Data Encryption

Up to 16MP UHD Supported

Power over Ethernet

Up to 8TB HDD Supported (HDD Sold Separately)

Intelligent H.265+/H.265/H.264 Video Compression

Your Security Center, Be Versatile

The RLN4E with 4 PoE ports supports up to 4 PoE cameras and 2 Wi-Fi cameras, plug-in or battery-powered, which could serve as a security center covering multiple scenes. If you additionally connect RLN4E with a PoE Switch (sold separately), it can support up to 6 PoE cameras. Enjoy complete protection provided by RLN4E by managing all cameras at one stop.

4 PoE Ports

Expandable to 6 Channels

Up to 16MP

Ultra High Definition

Up to 8TB HDD Supported

HDD Sold Separately

microSD Card

A built-in microSD card slot supports up to a 512GB microSD card, enabling offline storage that can keep your recordings safe even without a network connection.

HDD Storage

The RLN4E supports up to an 8TB 3.5''/2.5'' HDD (sold separately) to keep recordings from all connected cameras. All the data is well stored in the NVR. Cast away your worries about data loss, and enjoy peace of mind.

Heatmap: Traffic Made Visible

Visualize the activity pattern in your area. Turn the flow rate into sensible insights: the density of people, vehicles, and animals in a specific area is shown in different colors to see it in a split second. With Heatmap analysis, you can arrange the layout of your store as well as adjust security measures.

Uninterrupted Transmission via PoE

Free from complex cabling, install your cameras more flexibly at a lower cost. Connect the camera to the RLN4E with only one Ethernet cable that guarantees a stable power supply while transmitting data without delay. Experience the unmatched reliability of PoE connection.

Simple Cabling

Stable Connection

Quick Setup, Plug & Play

Equipped with Power over Ethernet technology, this NVR can connect to Reolink cameras in minutes, providing plug & play convenience. How to connect?

Step 1
Set up the NVR

Step 2
Set up the Camera

Step 3
Follow the Initiation Instructions

Connect the NVR to your router and a monitor/TV, then to a power outlet and turn it on.

Connect your camera to any PoE port on the NVR with an Ethernet cable.

When you power on the NVR for the first time, follow the instructions to complete the basic configuration.

Your Security, Be Reliable & Smart

Video Encryption

Enjoy advanced data protection with the exclusive encryption algorithm of RLN4E. Without permission, any attempts to access the storage are prevented, even if your device or microSD card is stolen.