Forum Replies Created
May 17, 2019 at 9:56 am in reply to: Add my cameras that are connected to my NVR to Blue Iris #264326
*Update* This did work Thank You, step 5 I had to manually type but other then that it worked like a charm.
Thanks Again!May 16, 2019 at 8:55 pm in reply to: Add my cameras that are connected to my NVR to Blue Iris #263860
I checked this problem with our R&D people. May I know if you connect the RLC-423 to channel 1 on the NVR? If you are, it is normal that the camera on channel 1 is added to the Blue Iris. If you also want to add other cameras to Blue Iris, you should modify the video path according to the channel. For example, if you want to add the camera in channel 2 to Blue Iris, you should change the path as /h264Preview_02_main in step 5. Please check the sample graph in the attachment.
Thanks Carl, Ill try that out tonight.
@Crimpon it was port 8000May 16, 2019 at 11:24 am in reply to: Add my cameras that are connected to my NVR to Blue Iris #263627
Yes, if you connect the camera to the NVR, you will not be able to access it separately. If you want to access it separately, you need to connect it to the router and let the router assign the IP for it. And then you can refer to How to Add Reolink Cameras to Blue Iris to add the camera to Blue Iris.
currently I have my PTZ camera connected to my reolink NVR and when I scan Network cameras on Blue Iris I can set up and view my RLC-423 camera. I added a screenshot to show Blue Iris and Reolink app showing the same camera at the same time.
Thank You, I'll buy a few more.
(other people reading, you will need a separate poe hub)May 16, 2019 at 9:56 am in reply to: Add my cameras that are connected to my NVR to Blue Iris #263598
My RLC-423 is POE only it doesn't have wifi capabilities. It's wired directly to NVR.
Be nice to know if this is true or not.
I replied back, please respond back.
I upgraded my NVR firmware and now 3 cameras say invalid password ANd the image is more fuzzy.
resolved, everything was reset back to default and I had to re-enter all passwords and change the tv output to 1080P
ok I found it from the DVR but was not able to find it using the desktop software.