Forum Security Cameras Wi-Fi Cameras RLC-410ws

This topic contains 5 replies, has 2 voices, and was last updated by  Anonymous 3 years, 3 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #5267

    larrykay
    Participant

    I have a RLC-410WS wifi camera, after initial setup can I hook it up with an Ethernet cable and run it off a switch thats not POE capable but keep it hooked up to a power supply?

    #5279

    Anonymous

    Yes, you can do that.

    #5284

    larrykay
    Participant

    Well mine doesn't work trying to run it through a switch using Ethernet cable and the cameras power supply,also when I try to do this none of my cameras that are on wifi work. As soon as I disconnect it from switch all cameras come back online. Figure this problem out?

    #5286

    Anonymous

    Is your switch connected to the same router as your computer does? Can you find the camera on the Reolink client software when it is connected to the switch?
    The camera should be in the same network as the computer, otherwise, they cannot communicate with each other.
    If the switch is connected to the same router while the cameras are still not working, would you please offer me a topology of your network?

    #5293

    larrykay
    Participant

    My setup is Computer, router , switch. Out of the switch I have a smart TV a BluRay player and one camera.The camera is not recognized by the network. which all are on the same network. I know it should work but it doesn't. When the camera is connected to switch my other camera which is also wifi is not recognized either until I disconnect the ethernet wire.Then all cameras are shown on network.

    #5315

    Anonymous

    Our technical support will contact your for further troubleshooting by email regarding this issue. Please check your email, hope we could fix this issue for you soon.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.