Forum Security Cameras PoE Cameras Reolink RLC-410-5MP low performance / FPS

This topic contains 1 reply, has 2 voices, and was last updated by  Cynthia 1 week, 5 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #1124916



    I bought 3pcs of RLC-410 and one RLC-520 to test out here. All 4 are wired and connected to a Ubiquiti POE+ Switch and all of them shows connectivity at 100/100 Mbps.

    My problem is that this one feed in my Carport is limited: 4.9 12/0.5 fps, 330kB/s

    My 3 other cameras (newest) are at: 4.9MP 30/1.3 fps, 760kB/s

    They have all the exact same settings, firmware upgraded and resolution on the highest, bitrate set to 6114, 30fps and baseline: high.

    The FPS on the carport camera goes down to 8 if i change it down to it but it never exceeds 12.

    Under performance you see the Carport camera showing:

    50% CPU – 2778 kbps – Ethernet throughput: 310KB/s

    But all the other 3 shows:

    60-90% CPU – 6500 kbps – Ethernet throughput: 810KB/s

    Any idea what might be wrong with my camera? Or what setting I've missed? 🙂



    Hi, there. You can send an email to the support team( and they will help you as soon as possible.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.