Forum Security Cameras Wi-Fi Cameras Can I power RLC-410W via 802.3af?

This topic contains 2 replies, has 2 voices, and was last updated by  Carl 10 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #193396

    Steven Kan

    I need one more inexpensive camera, and I'm considering either the RLC-410 or the RLC-410W. The 410W model is actually less expensive right now, despite have the WiFi option (in addition to wired Ethernet).

    Otherwise the specs look nearly identical except for:

    RLC-410 Image Sensor 1/3″ CMOS Sensor
    RLC-410W Image Sensor 1/2.7″ CMOS Sensor
    which I assume is just rounding, e.g. I'm guessing they're the exact same sensor


    RLC-410 Power Supply 12V DC or 48V PoE (802.3af)
    RLC-410W Power Supply DC12V

    Does the 410W actually lack the 802.3af input? Or is that just an inadvertent omission? It would be most logical if the cameras were identical except for the WiFi addition, but I need to power this over 802.3af so I need to be sure. Thanks!



    Steven Kan

    Actually it looks like the image sensor difference might be a typo. The 5 MP sensor is taller, and should have the 1/2.7″ sensor, whereas the 4 MP sensor should be 1/3.0″. But my question about the power supply compatibility is the real question.



    Hi Steven Kan, yes, we will check the size issue soon. For the power difference, the RLC-410 is a PoE camera and the 802.3af is a PoE port standard. But the RLC-410W is a WiFi camera, it doesn't support the PoE so no 802.3af compatible on it.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.