How to Add and Preview Reolink Camera in SecuritySpy

 

Reolink cameras support standard ONVIF and users can use iSpy for live view and recording.

Before using it, please check the camera’s local IP address and set its profile to “Baseline”.

Step 1. Launch SecuritySpy on your Mac and choose “Video device settings”. (You can also preview your Reolink camera in SecuritySpy).

Video Device Setting

Address:(the IP address of your camera)

ONVIF Port: 8000(default)

RTSP Port: 554(default)

Username/Password:(the account of your camera)

Format: RTSP TCP (video and audio)

Then click on “OK” to save the settings.

Address Port Username Password

Step 2. Click “Get profile list” and then choose an option between “MainStream” and “SubStream” to preview your camera.

Get Profile List

Step 3. You can choose “Individual camera video windows” or “Main video window” to preview your camera.

Individual Camera Video Windows

Main Video Window

Normally, the “Individual camera video windows” preview page should be like the below page:

Individual Camera Preview

The “Main video window” preview page should be like this page:

Main Video Window Preview

Step 4. If you use a Reolink camera which supports PT, you can right click and choose “Pan/Tilt/Zoom” to control your camera.

Pan Tilt Zoom

Network Camera PTZ

If you experience any problems, please contact us for further support.

Applies to:

All Reolink cameras

in ONVIF Software